Pressure reducer with 160 micron filter - BWT D1 3/4" water pressure reducer

Ref : 125300278

BWT D1 3/4" - Pressure reducer with integrated filter screen

The BWT pressure reducer is equipped with an integrated filter screen which has a treatment capacity of 6 months and a flow rate of 4.4 m3/h, it is installed on your drinking water supply to regulate and maintain the pressure at the desired value. Thanks to its integrated filter screen, it protects your installation against seizure and abrasion by retaining unwanted particles (sand, sludge, rust, etc.).

It is an ideal solution for people who seek to avoid damage from excessive pressure or reduce their water consumption.

The advantages of the pressure reducer 125300278:

ACS certified and guaranteed for 10 years
Protects your installation and equipment
Compatible with all standard pressure gauges
Prevents premature wear of your equipment
160 micron filtration
Helps save water

The pressure reducer with integrated strainer bwt D1 is delivered complete with: a set pressure adjustable without tools, a factory preset at 3 bars, a stainless steel filter screen.

EN STOCK Livré en 24/48H

€132.90 TTC

110,75€ HT

DEMANDE DE DEVIS

Paiements sécurisés (carte bancaire, visa, mastercard, paypal, mandat administratif)

BWT D1 3/4" pressure reducer - Pressure reducer with 160 micron filter screen

This pressure reducer is manufactured by BWT, which is the European leader in the field of water treatment.

The BWT D1 is a 2-in-1 device since it allows you to filter your impurities and reduce your pressure. With a filtration of 160 microns, the pressure regulator is perfect for domestic use and is suitable for pipes with a diameter of up to 20/27 mm.

Too much pressure can generate a premature wear of your equipment as well as overconsumption of water. The generally recommended pressure on an individual dwelling is 3 bars.

Technical description of the BWT pressure reducer:

Complete pre-adjusted kit (adjustable pressure setting and filter screen) ready to be installed
Maximum water temperature: 40° C
Flow rate of 4,400 l/h
Maximum pressure: 16 bars
Adjustable pressure: from 1.5 to 7 bars
Filtration fineness of 160 µm

This BWT water pressure regulator can be installed horizontally or vertically to adapt to your installation, the water pressure reducer can protect equipment against water hammer and save water

Dimension of the bwt d1 3/4" pressure reducing filter: Height x Width: 14.7 x 9cm.

Marque BWT
Type de filtration Filtre à sédiments
Type d'eaux Eau de réseau
Country of assembly France
Seuil de filtration 160µm
Température maximum 40°C
6Température minimum 1°C
Pression maximale 16 bars
Lavable Oui
Durée de vie 6 mois
Matière Laiton
Raccordement entrée / sortie 3/4" - 20/27
Débit nominal 4,4 m3/h
Couleur Laiton
Installation Sur l'arrivée d'eau froide
Pression réglable 1,5 à 7 bars
Pays de fabrication France
Hauteur 175 mm
Largeur 100 mm
Longueur 175 mm
Certification ACS
Garantie 10 ans
Volume 0 L
Produit partiellement réparable Oui
Type de produit Pressure reducer
Pression maximum 16 bars

1_BWTD1_2023

Opérateur économique responsable

BWT
103, rue Charles Michels
93200 Saint Denis

Demande de renseignements

Découvrez d'autres produits dans cette catégorie

Questions

luc Le 21/03/2024

Question:

Bonjour, Le réducteur de pression BWT D1 3/4 possède un filtre , est-il placé avant ou après que la pression d'eau soit réduite ? Merci de votre réponse. Bonne journée. Luc

Answer: