☀️ Adoucisseur-Eau reste ouvert tout l'été : commandes, conseils et livraison assurés.
Adoucisseur d'eau duplex 2x75L fleck 9100 complet
search
  • Adoucisseur d'eau duplex 2x75L fleck 9100 complet
  • Adoucisseur d'eau duplex 2x75L fleck 9100 complet
  • Adoucisseur d'eau duplex 2x75L fleck 9100 complet
  • Adoucisseur d'eau duplex 2x75L fleck 9100 complet
  • Adoucisseur d'eau duplex 2x75L fleck 9100 complet
  • Adoucisseur d'eau duplex 2x75L fleck 9100 complet

Adoucisseur d'eau duplex 2x75L fleck 9100 complet

BUEC726

Duplex fleck valve anti-limescale water softener complete 2x75L

Anti-limescale water softener Fleck 9100 valve with a capacity of 2x75 liters of resin (supplied and charged), it allows 24-hour anti-limestone treatment thanks to the alternating system.

The duplex softener allows you to remove limescale from your installation, this action will prolong the device life, will make household chores easier and will remove white marks caused by limestone.

Thanks to the Cintropur NW25 anti-sediment filter installed upstream, your device will be protected against the impurities present in the water, which allows it to work better over time. The water softener is ideal for a laundry or car wash unit.

The advantages of the BUEC726 complete anti-limescale water softener:

  • ACS certified and 2-year guarantee (possibility of extending the guarantee)
  • Allows continuous treatment thanks to the alternating system
  • Removes limescale, white marks and protects your devices
  • Made in France
  • Large volume for stations of washes or laundries

The duplex water softener is delivered complete with: valves, resin, bypass, bottles, mains connections, 2 meters of water drainage pipe, tubing, salt tank and an NW25 filter with 25 micron filtration.

logo en stockEN STOCK Livré en 24/48H
€1,929.00 TTC
1,607,50€ HT

Paiements sécurisés (carte bancaire, visa, mastercard, paypal, mandat administratif)
Fabriqué en France
Produit réparable

Water softener for car wash units

This duplex anti-limescale water softener is assembled by TOODO, a French water treatment specialist. The fleck 9100 valve is manufactured by PENTAIR which is highly reputed in water treatment, Pentair valves are known for their

< p>The BUEC726 uses a volumetric regeneration system, this regeneration mode consists in starting the regeneration when the volume of water is consumed. This must be calculated based on various parameters such as resin volume, application and raw hardness to get started before the resins become saturated with scale.

Why use the water softener? duplex water?

  • Protect equipment and your installations
  • Eliminate white marks caused by limescale
  • Improve washing quality li>
  • Saving chemicals and reducing maintenance tasks

The duplex water softener allows you to gain in living comfort by getting rid of limescale present in your water. Before using a softener, it is necessary to test and analyze the quality of your water.

Composition of the BUEC726 duplex softener:

  • Softener with a capacity of 2x75L with loaded resin
  • Valve Fleck 9100
  • Valves, bottles, bypass, 2 meters of pipes, connections, tubing, salt tank and 3 hoses
  • NW25 filter with 25 micron cartridge

Softener Dimension: Height x Width: 156.1 x 77 ,3cm.

  • Volume de résine 2 x 75L
  • Marque TOODO
  • Type de régnération Volumétrique
  • Famille de vanne Fleck 9100
  • Débit à 30°f pour une dureté résiduelle de 0°f 3,1 m3/h
  • Débit à 30°f pour une dureté résiduelle de 10°f 4,7 m3/h
  • Type de filtration Filtre à sédiments NW25
  • Capacité du bac 200kg
  • Consommation électrique par rénénération De 2 à 3W
  • Consommation en sel par régénération 11,250kg
  • Kit d'installation Fourni
  • Country of assembly France
  • Seuil de filtration 25µm
  • Réglage de la dureté Mixing proportionnel
  • Température maximum 35°C
  • 6Température minimum 1°C
  • Pression minimale 2 bars
  • Pression maximale 6 bars
  • Fabricant de la vanne Pentair
  • Type de vanne Électronique
  • Gamme de vanne Vanne Fleck
  • Dimensions du bac à sel H 1050mm x Ø530mm
  • Matière Fibre de verre armée / Polyéthylène
  • Raccordement entrée / sortie 1" M - 26/34 - By-pass fourni
  • Couleur Bleu / Blanc
  • Pays de fabrication France
  • Matière du bypass Noryl
  • Pouvoir d'échange 5,5°f/L
  • Indice de protection IP22
  • Type de flotteur Double sécurité + Air check
  • Alimentation Transformateur électrique
  • Tension d'alimentation 230Vac
  • Couleur du bac Blanc
  • Hauteur 1561 mm
  • Largeur 773 mm
  • Certification ACS
  • Garantie 2 ans
  • Produit réparable Oui
  • Type de produit Duplex water softener
  • Pression maximum 6 bars
GARANTIE : 7 ANS AVEC NOTRE KIT ENTRETIENT ANNUEL. INSTALLATION ADOUCISSEUR D EAU TRES FACILE GRACE AU KIT DE MONTAGE. ASSISTANCE TELEPHONIQUE POUR MISE EN SERVICE ET REGLAGE SUR TOUTE LA FRANCE. TOUTES LES PIECES SONT ENTIEREMENT REMPLACABLE ET DISPONIBLE. METTRE UN FILTRE AVANT L'ADOUCISSEUR POUR LE PROTEGER DES IMPURETES. POSSIBILITE DE REMONTER LA VIDANGE JUSQU'A 3M A PARTIR DU SOL POUR 3 BARS DE PRESSION PERMETTANT AINSI L'INSTALLATION EN CAVE SANS POMPE DE RELEVAGE.

Opérateur économique responsable

  • TOODO
  • 3 rue du Trégor - ZAC de la Mottais
  • 35140 Saint Aubin du Cormier

Demande de renseignements

Les produits associés

Découvrez d'autres produits dans cette catégorie

Voir aussi

Vos produits vus récemment

0
x
Product Comparison
Compare Now