Anti-limescale water softener for a car wash
This duplex water softener is assembled by TOODO, a French water treatment specialist. The fleck 9100 valve is manufactured by PENTAIR which is highly reputed in water treatment, Pentair valves are known for their
< p>The BUEC326 uses a
volumetric regeneration system, this regeneration mode consists in starting the regeneration when the volume of water is consumed. This must be calculated based on various parameters such as resin volume, application and raw hardness to get started before the resins become saturated with scale.
Why use the water softener? duplex water?
- Protect equipment and your installations
- Eliminate white marks caused by limescale
- Improve washing quality li>
- Saving chemicals and reducing maintenance tasks
The duplex water softener allows you to gain in living comfort by getting rid of limescale present in your water. Before using a softener, it is necessary to test and analyze the quality of your water.
Composition of the BUEC326 duplex softener:
- Softener with a capacity of 2x30L with loaded resin
- Valve Fleck 9100
- Valves, bottles, bypass, 2 meters of pipes, connections, tubing, salt tank and 3 hoses
- NW25 filter with 25 micron cartridge
Softener Dimension: Height x Width: 109.3 x 60 ,2cm.
-
Volume de résine
2 x 30L
-
Marque
TOODO
-
Type de régnération
Volumétrique
-
Famille de vanne
Fleck 9100
-
Débit à 30°f pour une dureté résiduelle de 0°f
3 m3/h
-
Débit à 30°f pour une dureté résiduelle de 10°f
4,5 m3/h
-
Type de filtration
Filtre à sédiments NW25
-
Capacité du bac
75kg
-
Consommation électrique par rénénération
De 2 à 3W
-
Consommation en sel par régénération
4,5kg
-
Kit d'installation
Fourni
-
Country of assembly
France
-
Seuil de filtration
25µm
-
Réglage de la dureté
Mixing proportionnel
-
Température maximum
35°C
-
6Température minimum
1°C
-
Pression minimale
2 bars
-
Pression maximale
6 bars
-
Fabricant de la vanne
Pentair
-
Type de vanne
Électronique
-
Gamme de vanne
Vanne Fleck
-
Dimensions du bac à sel
H 680mm x Ø467mm
-
Matière
Fibre de verre armée / Polyéthylène
-
Raccordement entrée / sortie
1" M - 26/34 - By-pass fourni
-
Couleur
Bleu / Blanc
-
Pays de fabrication
France
-
Matière du bypass
Noryl
-
Pouvoir d'échange
5,5°f/L
-
Indice de protection
IP22
-
Type de flotteur
Double sécurité + Air check
-
Alimentation
Transformateur électrique
-
Tension d'alimentation
230Vac
-
Couleur du bac
Blanc
-
Hauteur
1093 mm
-
Largeur
602 mm
-
Certification
ACS
-
Garantie
2 ans
-
Produit réparable
Oui
-
Type de produit
Duplex water softener
-
Pression maximum
6 bars
GARANTIE : 7 ANS AVEC NOTRE KIT ENTRETIENT ANNUEL. INSTALLATION ADOUCISSEUR D EAU TRES FACILE GRACE AU KIT DE MONTAGE. ASSISTANCE TELEPHONIQUE POUR MISE EN SERVICE ET REGLAGE SUR TOUTE LA FRANCE. TOUTES LES PIECES SONT ENTIEREMENT REMPLACABLE ET DISPONIBLE. METTRE UN FILTRE AVANT L'ADOUCISSEUR POUR LE PROTEGER DES IMPURETES. POSSIBILITE DE REMONTER LA VIDANGE JUSQU'A 3M A PARTIR DU SOL POUR 3 BARS DE PRESSION PERMETTANT AINSI L'INSTALLATION EN CAVE SANS POMPE DE RELEVAGE.