Duplex anti-limescale water softener for home
This duplex water softener is assembled by TOODO, a French water treatment specialist. The fleck 9100 valve is manufactured by PENTAIR which is highly reputed in water treatment, Pentair valves are recognized for their
< p>The BUE226 uses a
volumetric regeneration system, this regeneration mode consists of starting the regeneration when the volume of water is consumed. This must be calculated based on various parameters such as resin volume, application and raw hardness to get started before the resins become saturated with scale.
Why use the water softener? duplex water?
- Protect your appliances and installations
- Eliminate white marks caused by limescale
- Have less rough skin and hair less brittle
- Have a more supple and softer laundry
The duplex water softener allows you to gain in comfort of life by getting rid of the limestone present in your your water. Before using a softener, it is necessary to test and analyze the quality of your water.
Composition of the BUE226 duplex softener:
- Softener with a capacity of 2x20L with filled resin
- Valve Fleck 9100
- 2 meters of pipes, bypass valves, bottles, salt tank and tubing< /ul>
Dimension of the Softener: Height x Width: 109.2 x 55.3cm.
-
Volume de résine
2 x 20L
-
Marque
TOODO
-
Type de régnération
Volumétrique
-
Famille de vanne
Fleck 9100
-
Débit à 30°f pour une dureté résiduelle de 0°f
2,6 m3/h
-
Débit à 30°f pour une dureté résiduelle de 10°f
3,9 m3/h
-
Capacité du bac
75kg
-
Consommation électrique par rénénération
De 2 à 3W
-
Consommation en sel par régénération
3kg
-
Kit d'installation
Non (disponible)
-
Country of assembly
France
-
Réglage de la dureté
Mixing proportionnel
-
Température maximum
35°C
-
6Température minimum
1°C
-
Pression minimale
2 bars
-
Pression maximale
6 bars
-
Fabricant de la vanne
Pentair
-
Type de vanne
Électronique
-
Gamme de vanne
Vanne Fleck
-
Dimensions du bac à sel
H 680mm x Ø467mm
-
Matière
Fibre de verre armée / Polyéthylène
-
Raccordement entrée / sortie
1" M - 26/34 - By-pass fourni
-
Couleur
Bleu / Blanc
-
Pays de fabrication
France
-
Matière du bypass
Noryl
-
Pouvoir d'échange
5,5°f/L
-
Indice de protection
IP22
-
Type de flotteur
Double sécurité + Air check
-
Alimentation
Transformateur électrique
-
Tension d'alimentation
230Vac
-
Couleur du bac
Blanc
-
Hauteur
1092 mm
-
Largeur
553 mm
-
Certification
ACS
-
Garantie
2 ans
-
Produit réparable
Oui
-
Type de produit
Duplex water softener
-
Pression maximum
6 bars
GARANTIE : 7 ANS AVEC NOTRE KIT ENTRETIENT ANNUEL. INSTALLATION ADOUCISSEUR D EAU TRES FACILE. ASSISTANCE TELEPHONIQUE POUR MISE EN SERVICE ET REGLAGE SUR TOUTE LA FRANCE. TOUTES LES PIECES SONT ENTIEREMENT REMPLACABLE ET DISPONIBLE. METTRE UN FILTRE AVANT L'ADOUCISSEUR POUR LE PROTEGER DES IMPURETES. POSSIBILITE DE REMONTER LA VIDANGE JUSQU'A 3M A PARTIR DU SOL POUR 3 BARS DE PRESSION PERMETTANT AINSI L'INSTALLATION EN CAVE SANS POMPE DE RELEVAGE.