Water softener for small hotels
This bi-bloc anti-limescale softener is assembled by TOODO, a French water treatment specialist. The fleck 2850 valve is manufactured by PENTAIR which is highly reputed in water treatment, Pentair valves are recognized for their
< p>The BVEC1040 uses a
volumetric regeneration system, this regeneration mode consists of starting regeneration when the volume of water is consumed. This must be calculated based on various parameters such as resin volume, application and raw hardness to get started before the resins become saturated with scale.
Why use the water softener? bi-block water?
- Protect equipment and your installations
- Eliminate white marks caused by limescale and facilitate household chores
- Reduction of downtimes and optimization of production processes
- Energy saving and reduction of maintenance costs
The bi-block water softener allows you to gain in comfort of life by getting rid of the limestone present in your water. Before using a softener, it is necessary to test and analyze the quality of your water.
Composition of the BVEC1040 bi-bloc softener:
- Softener with a capacity of 100L with loaded resin
- Valve Fleck 2850
- Valves, bottle, 2 meters of hoses, connections, tubing, salt tank and 3 hoses
- 1 pulse counter and 1 analysis kit
- NW500 filter with 25 micron cartridge
Dimensions of the Softener: Height: 185.6cm.
-
Volume de résine
100L
-
Marque
TOODO
-
Type de régnération
Meter controlled
-
Famille de vanne
Fleck 2850 SXT
-
Débit à 30°f pour une dureté résiduelle de 0°f
8,9 m3/h
-
Débit à 30°f pour une dureté résiduelle de 10°f
12,8 m3/h
-
Type de filtration
Filtre à sédiments NW400
-
Capacité du bac
200kg
-
Consommation électrique par rénénération
2 to 3W
-
Consommation en sel par régénération
15kg
-
Kit d'installation
Included
-
Country of assembly
France
-
Seuil de filtration
25µm
-
Réglage de la dureté
Vanne de cépage
-
Température maximum
35°C
-
6Température minimum
1°C
-
Pression minimale
2 bars
-
Pression maximale
8 bars
-
Fabricant de la vanne
Pentair
-
Type de vanne
Electronic
-
Gamme de vanne
Fleck valve
-
Dimensions du bac à sel
H 1050mm x Ø530mm
-
Matière
Fibreglass-reinforced / Polyethylene
-
Raccordement entrée / sortie
1"1/2 M - 40/49
-
Couleur
Blue / White
-
Pays de fabrication
France
-
Matière du bypass
Noryl
-
Pouvoir d'échange
5,5°f/L
-
Indice de protection
IP22
-
Type de flotteur
Dual safety + Air check
-
Alimentation
Transformer
-
Tension d'alimentation
230Vac
-
Couleur du bac
White
-
Hauteur
1856 mm
-
Certification
ACS
-
Garantie
2 years
-
Produit réparable
Yes
-
Type de produit
Water softener with separate brine tank
-
Pression maximum
8 bars
GARANTIE : 7 ANS AVEC NOTRE KIT ENTRETIENT ANNUEL. INSTALLATION ADOUCISSEUR D EAU TRES FACILE GRACE AU KIT DE MONTAGE. ASSISTANCE TELEPHONIQUE POUR MISE EN SERVICE ET REGLAGE SUR TOUTE LA FRANCE. TOUTES LES PIECES SONT ENTIEREMENT REMPLACABLE ET DISPONIBLE. METTRE UN FILTRE AVANT L'ADOUCISSEUR POUR LE PROTEGER DES IMPURETES. POSSIBILITE DE REMONTER LA VIDANGE JUSQU'A 3M A PARTIR DU SOL POUR 3 BARS DE PRESSION PERMETTANT AINSI L'INSTALLATION EN CAVE SANS POMPE DE RELEVAGE.