Water softener for farms
This bi-bloc softener is assembled by TOODO, a French specialist in water treatment. The fleck 2850 valve is manufactured by PENTAIR which is highly reputed in water treatment, Pentair valves are recognized for their
< p>The BVE1040 uses a
volumetric regeneration system, this regeneration mode consists of starting regeneration when the volume of water is consumed. This must be calculated based on various parameters such as resin volume, application and raw hardness to get started before the resins become saturated with scale.
Why use the water softener? bi-block water?
- Protect equipment and your installations
- Eliminate white marks caused by limescale and facilitate household chores
- Improves the comfort of your customers
- Energy saving
The bi-bloc water softener allows you to gain in living comfort by getting rid of limescale present in your water. Before using a softener, it is necessary to test and analyze the quality of your water.
Composition of the BVE1040 bi-block softener:
- Softener with a capacity of 100L with loaded resin
- Valve Fleck 2850
- 2 meters of pipes, valves, bottle, salt tank and tubing
- 1 pulse meter
Dimension of the Softener: Height: 185.6cm.
-
Volume de résine
100L
-
Marque
TOODO
-
Type de régnération
Meter controlled
-
Famille de vanne
Fleck 2850 SXT
-
Débit à 30°f pour une dureté résiduelle de 0°f
8,9 m3/h
-
Débit à 30°f pour une dureté résiduelle de 10°f
12,8 m3/h
-
Capacité du bac
200kg
-
Consommation électrique par rénénération
2 to 3W
-
Consommation en sel par régénération
15kg
-
Kit d'installation
No (available separately)
-
Country of assembly
France
-
Réglage de la dureté
Vanne de cépage
-
Température maximum
35°C
-
6Température minimum
1°C
-
Pression minimale
2 bars
-
Pression maximale
8 bars
-
Fabricant de la vanne
Pentair
-
Type de vanne
Electronic
-
Gamme de vanne
Fleck valve
-
Dimensions du bac à sel
H 1050mm x Ø530mm
-
Matière
Fibreglass-reinforced / Polyethylene
-
Raccordement entrée / sortie
1"1/2 M - 40/49
-
Couleur
Blue / White
-
Pays de fabrication
France
-
Matière du bypass
Noryl
-
Pouvoir d'échange
5,5°f/L
-
Indice de protection
IP22
-
Type de flotteur
Dual safety + Air check
-
Alimentation
Transformer
-
Tension d'alimentation
230Vac
-
Couleur du bac
White
-
Hauteur
1856 mm
-
Certification
ACS
-
Garantie
2 years
-
Produit réparable
Yes
-
Type de produit
Water softener with separate brine tank
-
Pression maximum
8 bars
GARANTIE : 7 ANS AVEC NOTRE KIT ENTRETIENT ANNUEL. INSTALLATION ADOUCISSEUR D EAU TRES FACILE. ASSISTANCE TELEPHONIQUE POUR MISE EN SERVICE ET REGLAGE SUR TOUTE LA FRANCE. TOUTES LES PIECES SONT ENTIEREMENT REMPLACABLE ET DISPONIBLE. METTRE UN FILTRE AVANT L'ADOUCISSEUR POUR LE PROTEGER DES IMPURETES. POSSIBILITE DE REMONTER LA VIDANGE JUSQU'A 3M A PARTIR DU SOL POUR 3 BARS DE PRESSION PERMETTANT AINSI L'INSTALLATION EN CAVE SANS POMPE DE RELEVAGE.