new

Box 10" anti-impurity cartridges with axial support - 20 microns

Ref : P0003352

Replacement anti-sediment cartridge 20 microns

The BWT filter cartridge is compatible with most anti-sediment filters on the market, it has a treatment capacity of approximately 6 months.

The filter cartridge is installed to replace the existing one in your CRISTAL 4 filter, it is compatible with all 10" anti-impurity filters on the market. The filter cartridge allows to protect your installation against seizure and abrasion by retaining particles.It is an ideal solution for those seeking to eliminate impurities and unwanted particles (sand, sludge, rust, etc.) ) of their water.

The bwt filter cartridge is supplied with an axial support to facilitate its installation.

With a filtration of 20 microns, the BWT CRISTAL 4 cartridge is perfect for domestic use, it provides high quality filtration.

Advantages anti-sediment cartridges P0003352:

Easy to install and replace
20 micron filtration
Supplied with axial support
Protects your installation against seizing and abrasion
Removal of impurities and particles in the water
Compatible with all 10-inch filter holders

The bwt anti-sediment cartridge must be changed every 6 months.

EN STOCK Livraison 24/48h

€34.50 TTC

28,75€ HT

DEMANDE DE DEVIS

Paiements sécurisés (carte bancaire, visa, mastercard, paypal, mandat administratif)

20 micron anti-impurity replacement cartridge

This 10-inch filter cartridge is manufactured by BWT, which is the European leader in water treatment. p>

How to change the BWT 20 micron filter cartridge?

Shut off the water supply
Open a tap downstream of your filter to lower the pressure
Unscrew the bowl and remove the used cartridge
Install the new cartridge and screw on the bowl
Gently re-engage the water supply

The anti-impurity cartridge is a standard cartridge which means that it is compatible with all 10-inch pot filters on the market.

Marque BWT
Type de filtration Filtre à sédiments
Type d'eaux Eau de réseau
Country of assembly France
Seuil de filtration 20µm
Capacité de traitement 6 mois
Taille de cartouche 9"3/4
Température maximum 40°C
6Température minimum 0°C
Lavable Non
Matière Polypropylène
Compatible Filtre 10"
Couleur Blanc
Pays de fabrication France
Largeur 63 mm
Longueur 248 mm
Certification ACS
Type de produit Cartouche de filtration 9"3/4

Télécharger le PDF Cartouches_2023

Cartouches_2023

Opérateur économique responsable

BWT
103, rue Charles Michels
93200 Saint Denis

Demande de renseignements

Les produits associés

Découvrez d'autres produits dans cette catégorie

Questions

Be the first to ask a question about this product!

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Voir aussi

Vos produits vus récemment